Trusses are the future.
The only way to build homes is with roof trusses.

 

On-site Roof Truss Pressing Equipment the Only Way To Build and Save Money.

Easy To Install on-site Roof Truss Pressing Equipment With Less Headaches.

On-site Roof Truss Pressing Equipment Is Hard To Do

A roof truss is made of several pieces of wood that are joined together. Each piece of the truss is referred to as a "member". A brace is a member that prevents a structural element from buckling or racking. Members are generally subjected to tensile or compressive forces. Tension forces tend to pull a member apart while compressive forces tend to push a member together.

Trussed roofs have a roof-line which is raised what we call a pitch, trussed loft conversions always require certain dimensions to make sure it can fit in your situation. The technological solution - trussed roofs - balances roof stresses of roof and ceilings and allows lower roof pitches. You can get alot more room out of your roof with attic trusses for all the loft area. See your local manufacturer for more information on attic trusses.

Roof-truss solutions, residential and commercial, include: on-site roof truss pressing equipment that meet or exceed wind, weight-loading, and deflection criteria. A roof truss can make complex roofs easier to build, providing a complete system that includes girders, hip framing, vaulted or coffered ceilings, and more—all bearing on outside-wall or intersecting trusses. The system eliminates posts and beams and allows for clear-span floor plans / open concept. This all can save time money and used that somewhere else in your project.

  • Insulation: Lumber has excellent insulation capabilities, and there are no temperature bridges through the timber.
  • Clear Spans: Lets interior partitioning and room arrangement very flexible. Clear spans up to 80´-0" are common.
  • Environmentally Compatible: Wood is the only one with the most energy efficient of major building products.
  • Economy: Labor savings due to light weight, easy to install with job site labor, no trimming, no cutting, open webs, very fast to finish, result in overall lower cost.
  • Consistent Quality: Shop fabricated on precision machinery in accordance with high standards (usually but check with manufacturer).
  • Architectural Versatility: Almost unlimited aesthetic and workable design capability.

Web Members: The web members of a on-site roof truss pressing equipment divide it into triangles. The members indicated by heavy lines normally carry stresses for vertical loads. The top chords of these on-site roof truss pressing equipment slope slightly in one or two directions for roof drainage, but this does not change the type of truss. The necessary number of subdivisions, or panels, depends on the length of the span.

Wood roof trusses have been used in residential constructionfor over 26 years. In more remote locations they are built on-site and the joints covered what is called plywood gussets, and nailed according to engineers. This research reviewed and updated the design and nailing standards, particularly in regards rain and snow load. The updating provides useful information for all of who build trusses on-site.

If you can find what you are looking for check my other webpages.

Once again, modern materials and techniques have come to the rescue, so today we use attic trusses in trussed roof loft conversions to replace bulky timber webs and free up loft space.