Trusses are the future.
The only way to build homes is with roof trusses.

 
Build your own roof truss can be done 

Build your Own Roof Truss the Only Way To Build and Save Money.

Easy To Install build your Own Roof Truss With Less Headaches.

A build your own roof truss is a framed or jointed structure composed of straight members connected only at their intersections in such a way that if loads are applied at these intersections, the stress in each member is in the direction of it length. Straight, sound timber should be used in trusses. (The Howe, Fink, and King Post trusses are most commonly used.) build your own roof truss are used for large spans to give wide, unobstructed floor space for such large buildings as hangers and polebarns. Small buildings are trussed to save material. Small trusses act as rafters and give the roof rigidity.

Web Members: The web members of a build your own roof truss divide it into triangles. The members indicated by heavy lines normally carry stresses for vertical loads. The top chords of these build your own roof truss slope slightly in one or two directions for roof drainage, but this does not change the type of truss. The necessary number of subdivisions, or panels, depends on the length of the span.

Trussed roofs have a roof-line which is raised what we call a pitch, trussed loft conversions always require certain dimensions to make sure it can fit in your situation. The technological solution - trussed roofs - balances roof stresses of roof and ceilings and allows lower roof pitches. You can get alot more room out of your roof with attic trusses for all the loft area. See your local manufacturer for more information on attic trusses.

  • Consistent Quality: Shop fabricated on precision machinery in accordance with high standards (usually but check with manufacturer).
  • Local Availability: Manufactured in over than 550 plants across the United States, eliminating saving from long shipments or lead times.
  • Economy: Labor savings due to light weight, easy to install with job site labor, no trimming, no cutting, open webs, very fast to finish, result in overall lower cost.
  • Insulation: Lumber has excellent insulation capabilities, and there are no temperature bridges through the timber.
  • Clear Spans: Lets interior partitioning and room arrangement very flexible. Clear spans up to 80┬┤-0" are common.
  • Architectural Versatility: Almost unlimited aesthetic and workable design capability.
  • Environmentally Compatible: Wood is the only one with the most energy efficient of major building products.
  • Proven Performance: Over 149 million roof truss systems have been installed throughout the country over the years. Properly fabricated and erected, they are trouble free perfect fit if designed right.

Wood roof trusses have been used in residential constructionfor over 26 years. In more remote locations they are built on-site and the joints covered what is called plywood gussets, and nailed according to engineers. This research reviewed and updated the design and nailing standards, particularly in regards rain and snow load. The updating provides useful information for all of who build trusses on-site.

Thanks for checking out my site and I appreciate any questions you may have.

Once again, modern materials and techniques have come to the rescue, so today we use attic trusses in trussed roof loft conversions to replace bulky timber webs and free up loft space.